PA6-CF filament blends Nylon 6 with chopped carbon fibers for very strong, stiff parts that resist heat and maintain shape in dry environments. It prints at 260–300 °C nozzle and 100–120 °C bed, uses a hardened steel 0.6 mm nozzle, and holds a precise 1.75 mm diameter (±0.03 mm). Ideal for load-bearing fixtures, automotive clips, and engineering prototypes.

Key Features

• Superior stiffness and strength with 151 MPa bending strength and 5 460 MPa modulus for rigid components

• High impact resistance (27.8 kJ/m²) and vibration damping for durable parts

• Low moisture uptake (0.88%) to maintain dimensions in humid conditions when stored and printed dry

• Heat deflection up to 186 °C for high-temperature use without deformation

• Matte black finish hides layer lines and gives a professional look

• Requires drying at 80 °C for 8–12 h before use and an enclosed chamber to reduce warping

• Not compatible with AMS or AMS Lite – manual loading only