Bambu Lab Support for PA/PET
Bambu Lab Support for PA/PET
Achieve effortless support removal with Bambu Lab Support for PA/PET filament, made for professional printing of PAHT-CF, PA6-CF, PET-CF, and PA-GF. This 1.75 mm filament offers stable support at high print temperatures (280–300°C) and is designed for seamless compatibility with Bambu AMS. Remove by hand for clean results on detailed parts, eliminating tedious post-processing—perfect for advanced additive manufacturing.
Key Features
-
High-temp breakaway support tailored for PA, PET, CF/GF composites—stable up to 300°C
-
Precision 1.75mm ±0.03mm diameter for exact layer adhesion and smooth print surfaces
-
AMS-ready filament with RFID support; instant parameter detection for reliable automated workflows
-
Easy removal by hand after printing; prevents damage and speeds up post-processing
-
Enclosure printer recommended; optimized for complex engineering models and functional prototypes
-
Supports rapid drying (80°C/12h) and low humidity storage; resists sticking from ambient moisture
Bambu Lab Support for PA/PET is specially formulated to provide strong and stable support for engineering filaments like PAHT‑CF, PA6‑CF, and PET‑CF. It ensures excellent adhesion to the main model, reliably supporting overhangs and complex shapes throughout the printing process. After printing, the breakaway support is easy to remove by hand, helping achieve clean results with minimal post-processing.
This support filament must be fully dried before use for optimal performance and should only be used for support interfaces, not for printing models alone. To prevent the supports from sticking to your model, it's recommended to remove them within two hours after printing and keep humidity below 20% RH during storage.
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.
